- 表面張力測定儀:探索液體微觀世界的精密工具
- 張力自動測定儀:工業檢測與科研分析的重要工具
- 全自動表面張力儀的原理、應用與未來發展
- 全自動表面張力測定儀的原理、應用與未來發展
- 圓環法自動張力測定儀是一種新型的張力測定設備
- 液體表面張力測試儀揭示液體表面之謎
- 全自動張力測定儀開啟測量的新篇章
- 液體表面張力測定儀及其應用
- 酸值自動測定儀是提高實驗效率與精確度的工具
- 石油產品張力自動測定儀是提升精確性與效率的工具
產品名稱:
PND176A凝點冷濾點測定儀
更新時間:2023-08-09
產品特點:PND176A凝點冷濾點測定儀一、用途及適用范圍本儀器是按照中華人民共和國標準GB/T510《石油產品凝點測定法》及中華人民共和國行業標準SH/T0248《餾分燃料冷濾點測定法》等規定的要求設計制造的,適用于按上述兩標準規定的方法測定石油產品的凝點及冷濾點。
產品詳細資料:
PND176A凝點冷濾點測定儀
一、用途及適用范圍 本儀器是按照中華人民共和國標準GB/T510《石油產品凝點測定法》及中華人民共和國行業標準SH/T0248《餾分燃料冷濾點測定法》等規定的要求設計制造的,適用于按上述兩標準規定的方法測定石油產品的凝點及冷濾點。 PND176A凝點冷濾點測定儀 二、儀器使用的工作條件 1、儀器應放置在平整牢固的工作臺上,環境中應盡可能減小空氣對流。 2、本產品涉及到易燃的材料,操作時周圍不允許有明火(或產生火星的裝置)靠近。 3、儀器不用時應放置在干燥通風處。 4、供電電源為單相三線制,必須有良好的接地端。 三、主要技術規格及參數 1、工作電源: AC220V±10%;50Hz。 2、冷槽控溫: 室溫~-75℃ ±0.5℃ 3、制冷系統: 新型制冷壓縮機。 4、試驗孔數: 兩孔, 兩孔等溫 5、環境溫度: ≤30℃ 。 6、相對濕度: ≤85%。 7、功耗: 不大于1000W。 PND176A pour point, cold filter plugging point tester A, application and applicable scope The apparatus is in accordance with the standards of people's Republic of China GB/T510 "pour point of petroleum products - Determination of" people's Republic of China and the industry standard SH/T0248 "distillate fuel cold filter plugging point determination" and other requirements of the design and manufacturing, according to the provisions of the above two method is applicable to the determination of standard of petroleum products pour point and cold filter plugging point. Two, the use of working conditions of instrument 1, the instrument should be placed in the formation of a solid table, should as far as possible to reduce air convection environment. 2, the product involves the flammable material, operation not allowed around the fire (or generating device near Mars). 3, when the instrument is not should be placed in dry and ventilated place. 4, the power supply for the single-phase three wire system, must have a good grounding end. Three, the main technical parameters and specifications 1, a working power supply: AC220V 10%; 50Hz. 2, cold trough temperature: room temperature to -75 - 0.5 Deg. C 3: the new kind of refrigeration compressor, refrigeration system. 4, test hole number: two holes, two holes isothermal 5, the ambient temperature is less than or equal to 30 DEG C. 6, the relative humidity is less than or equal to 85%. |
7, power consumption: less than 1000W.
如果你對我們的產品感興趣,想了解更詳細的信息,填寫下表直接與廠家聯系: |